MICROSTRUCTURAL EVOLUTION AND TENSILE BEHAVIOR OF DISSIMILAR STEEL JOINTS UNDER MULTI-PASS WELDING
Indonesia 
China China 
Article Sidebar
-
Dissimilar Steel Joints, Fracture Behavior, Microstructural Evolution
Abstract
Dissimilar steel joints are increasingly employed in demanding engineering structures, yet repeated thermal cycles during multi-pass welding can generate complex microstructural heterogeneity and localized mechanical-property gradients that affect structural integrity. This study investigates the relationship between cumulative welding thermal history, microstructural evolution, local property variation, and tensile fracture behavior in multi-pass dissimilar steel joints. An experimental laboratory design integrated controlled multi-pass welding, metallographic characterization, microhardness mapping, transverse tensile testing, fracture-location analysis, and fractographic examination to establish process–structure–property relationships. The results revealed pronounced microstructural and hardness variations across the weld metal, fusion boundaries, heat-affected zones, and base materials due to unequal thermal histories and repeated reheating. Tensile fracture occurred preferentially within or adjacent to mechanically heterogeneous transition regions rather than consistently within the weld centerline or maximum-hardness zone, demonstrating the critical influence of local strength–ductility mismatch and deformation compatibility. The study concludes that tensile performance cannot be adequately explained by average strength or peak hardness alone. An integrated pathway linking thermal history, microstructural evolution, property gradients, strain localization, and fracture behavior provides a stronger mechanistic framework for evaluating joint integrity and optimizing multi-pass welding procedures for reliable dissimilar steel structures under demanding industrial service conditions.
Full text article
References
Bagheri Vanani, B., Mehraban Dehaqani, M. R., Abbasi, M., Sadeqi Bajestani, M., Mohammadkhah, M., & Klinge, S. (2025). Effects of PWHT on the microstructure, corrosion, tribology, and mechanical properties of mild steel welds under different joining positions: Experimental and Numerical Study. Journal of Materials Research and Technology, 38, 752–767. https://doi.org/https://doi.org/10.1016/j.jmrt.2025.07.253
Chen, H., Zhang, C., Liang, X., Wang, C., Han, J., Wang, B., Wang, T., & Cao, P. (2025). Enhanced interfacial characteristics and mechanical properties of Ti/steel clad plates fabricated by explosion welding and hot rolling. Journal of Materials Processing Technology, 341, 118920. https://doi.org/https://doi.org/10.1016/j.jmatprotec.2025.118920
Chen, M., Jiang, B., Ding, R., Liu, Y., Yu, L., Wang, Z., Liu, C., & Liu, Y. (2023). Microstructure evolution and tensile behaviors of dissimilar TLP joint of austenitic steel and high-Cr ferritic steel. Materials Science and Engineering: A, 870, 144818. https://doi.org/https://doi.org/10.1016/j.msea.2023.144818
Ding, K., Fan, M., He, Y., Huo, X., Liu, X., Wei, T., Wu, G., & Gao, Y. (2023). Microstructure evolution and its effect on the stress rupture behavior of 9%Cr-CrMoV dissimilar welded joint. Engineering Failure Analysis, 146, 107071. https://doi.org/https://doi.org/10.1016/j.engfailanal.2023.107071
Fang, X., Wu, Y., Yang, X., Yang, Y., Cheng, L., Zhang, Q., Liu, X., & Mi, Z. (2024). Microstructure and mechanical properties of the laser welded air-hardening steel joint. Materials Characterization, 213, 114048. https://doi.org/https://doi.org/10.1016/j.matchar.2024.114048
Feng, J., Luo, C., Liu, J., Liu, H., Zhang, Y., Chen, X., Jiang, M., & Tian, Y. (2024). Narrow gap multi-pass laser welding with 52M/308L double wires filler addition for SA508/316L dissimilar metals. International Journal of Pressure Vessels and Piping, 211, 105286. https://doi.org/https://doi.org/10.1016/j.ijpvp.2024.105286
He, G.-Q., Zhou, S., Gong, Y., Wu, Q., Yang, Z.-G., Zhang, M.-L., Zang, Y.-P., Deng, J.-G., & Wang, Y. (2024). Welding process optimization for steam generator divider plate against disbonding of dissimilar metal weld. Engineering Failure Analysis, 166, 108845. https://doi.org/https://doi.org/10.1016/j.engfailanal.2024.108845
Huang, Y., Huang, T., Zhang, S., Yang, Z., Liu, Q., Zhan, Y., Fan, K., Xiong, J., Yang, J., Guo, Y., Luo, X., & Zhou, Q. (2024). Effect of post weld heat treatment on microstructural and mechanical properties of martensitic heat-resistant steel weldments. International Journal of Pressure Vessels and Piping, 212, 105323. https://doi.org/https://doi.org/10.1016/j.ijpvp.2024.105323
Huang, Y., Zhang, R., Wang, F., Zhou, Z., Zhang, P., Yan, J., Yuan, Y., Gu, Y., Cui, C., Zhou, Y., & Sun, X. (2024). Effect of PWHT on microstructure and mechanical properties of welded joint of a new Fe-Ni-based superalloy. Materials Science and Engineering: A, 906, 146699. https://doi.org/https://doi.org/10.1016/j.msea.2024.146699
Jabar, S., Pamarthi, V. V, Hayat, Q., Khan, M. H., Kotadia, H. R., & Franciosa, P. (2025). A review of beam shaping approaches for near-infrared continuous-wave laser welding in e-mobility applications. Optics & Laser Technology, 192, 114000. https://doi.org/https://doi.org/10.1016/j.optlastec.2025.114000
Jiao, H., & Jin, H. (2025). Finite element and experimental analysis of residual stresses in G20Mn5 welded joints considering solid-state phase transformation. International Journal of Pressure Vessels and Piping, 214, 105422. https://doi.org/https://doi.org/10.1016/j.ijpvp.2024.105422
Kumar, A., Pandey, S. M., Sirohi, S., Fydrych, D., & Pandey, C. (2023). P92 steel and inconel 617 alloy welds joint produced using ERNiCr-3 filler with GTAW process: Solidification mechanism, microstructure, mechanical properties and residual stresses. Heliyon, 9(8), e18959. https://doi.org/https://doi.org/10.1016/j.heliyon.2023.e18959
Kumar, A., Singhal, A., Sirohi, S., Hirshikesh, Fydrych, D., & Pandey, C. (2025). Pulsed current GTAW Inconel 625/AISI 304 L steel dissimilar joint: Microstructure and mechanical properties. Journal of Constructional Steel Research, 231, 109602. https://doi.org/https://doi.org/10.1016/j.jcsr.2025.109602
Kumar, N., & Kumar, P. (2024). Investigation on microstructural and mechanical integrity of GTAW dissimilar welded joint of IN 718/ASS 304L using Ni-based filler IN 625 using EBSD and DHD techniques. International Journal of Pressure Vessels and Piping, 209, 105213. https://doi.org/https://doi.org/10.1016/j.ijpvp.2024.105213
Li, S., Zhang, P., Hou, X., Wu, T., Liu, Z., Wang, X., He, P., & Arackal Narayanan, J. (2025). Weldability of rolled AlCoCrFeNi2.1/GH4169 dissimilar joints fabricated by electron beam welding. Materials Science and Engineering: A, 948, 149348. https://doi.org/https://doi.org/10.1016/j.msea.2025.149348
Li, Y.-W., Zhang, S., Zhao, J., Yu, X., & Zhang, W. (2025). Experimental study on the strength of Fe-SMA to Q355 structural steel butt welded joints. Journal of Constructional Steel Research, 226, 109277. https://doi.org/https://doi.org/10.1016/j.jcsr.2024.109277
Li, Z., Yuan, X., Yang, B., Wang, K., Zhao, Y., Sun, J., Li, J., Yang, G., Qiu, C., & Li, T. (2025). Dynamic mechanical behaviors of welded joints in power transmission construction project. Journal of Constructional Steel Research, 227, 109338. https://doi.org/https://doi.org/10.1016/j.jcsr.2025.109338
Liu, H., Fan, W., Xu, Z., Sun, C., Wu, Y., Ju, J., & Ma, J. (2025). Research progress of solid-phase welding technology between magnesium and dissimilar metals. Journal of Materials Research and Technology, 38, 5409–5440. https://doi.org/https://doi.org/10.1016/j.jmrt.2025.09.029
Liu, Y., Gong, B., Liu, S., Deng, C., Zhao, Y., Liu, Y., & Hu, W. (2025). Low-cycle fatigue properties and fracture location transition mechanism of dissimilar steel welded joints in towers of wind turbines. International Journal of Fatigue, 190, 108672. https://doi.org/https://doi.org/10.1016/j.ijfatigue.2024.108672
Ma, J., Deng, H., Liang, L., Tong, W., Wang, X., Yang, N., Wang, Z., Wen, W., Yang, L., Wu, J., & Liu, Z. (2023). Achieving superplastic TWIP steel welded joint via vacuum electron beam welding. Journal of Materials Research and Technology, 27, 1000–1016. https://doi.org/https://doi.org/10.1016/j.jmrt.2023.09.218
Maurya, A. K., B, A., Kamaraj, M., Chhibber, R., & Pandey, C. (2025). Texture corrosion resistance of SDSS 2507/Inconel 625 GTA welds: a synergistic microstructural study. Materials Chemistry and Physics, 344, 131153. https://doi.org/https://doi.org/10.1016/j.matchemphys.2025.131153
Maurya, A. K., Bhattacharyya, A., Chhibber, R., & Pandey, C. (2024). Structural integrity and corrosion behavior assessment of the dissimilar gas tungsten arc welded joint of sDSS 2507/ IN625 superalloy. Materials Chemistry and Physics, 318, 129322. https://doi.org/https://doi.org/10.1016/j.matchemphys.2024.129322
Minhas, N., Sharma, V., Manda, S., & Thakur, A. (2023). Insights into the microstructure evolution and mechanical behavior of dissimilar friction stir welded joints of additively manufactured AlSi10Mg and conventional 7075-T651 aluminum alloys. Materials Science and Engineering: A, 881, 145407. https://doi.org/https://doi.org/10.1016/j.msea.2023.145407
Naseem, A., Ilyas, M., Shehbaz, T., Hussain, G., & Alkahtani, M. (2024). Microstructural and mechanical characterization of electron beam welded low-nickel nitrogen-strengthened austenitic stainless steel. Heliyon, 10(14), e34315. https://doi.org/https://doi.org/10.1016/j.heliyon.2024.e34315
Pang, Y., Yu, H., Xia, C., Ni, C., Chen, C., Wang, S., Jia, Y., Xiao, Z., & Yi, J. (2025). Microstructural evolution and bonding mechanisms during multi-pass cold welding of high-strength precipitation-hardened alloys. Journal of Materials Processing Technology, 341, 118905. https://doi.org/https://doi.org/10.1016/j.jmatprotec.2025.118905
Salarvand, V., Ahmadian, F., Torabpour, M., EsmaeilZadeh, M., Abidi, M. H., Mehrabi, O., Sohrabpoor, H., Mostafaei, A., & Brabazon, D. (2024). Microstructure, mechanical properties, and corrosion resistance of dissimilar weld joints between SS304 and Inconel 600 welded using gas tungsten arc welding. International Journal of Pressure Vessels and Piping, 212, 105356. https://doi.org/https://doi.org/10.1016/j.ijpvp.2024.105356
Sánchez-Amaya, J. M., Chludzinski, M., Sambruno, A., & Gómez-Parra, A. (2025). Understanding the influence of different HLAW parameters to increase the welding speed of 8 mm thick structural steel. Journal of Materials Research and Technology, 39, 7217–7230. https://doi.org/https://doi.org/10.1016/j.jmrt.2025.11.058
Saravana Sundar, A., Wu, C., Li, L., Kar, A., & Kumar, A. (2025). Microstructural evolution and strengthening mechanisms in multi-pass friction stir additive manufacturing of Al6061-Al5083 dissimilar builds: A study of overlapping thermo-mechanical zones. Journal of Materials Processing Technology, 343, 118956. https://doi.org/https://doi.org/10.1016/j.jmatprotec.2025.118956
Shotri, R., Morisada, Y., Ushioda, K., Serizawa, H., & Fujii, H. (2025). Immiscible Cu-SS304 thin tube forge welding via novel PJFW process. International Journal of Mechanical Sciences, 305, 110780. https://doi.org/https://doi.org/10.1016/j.ijmecsci.2025.110780
Sonar, T., Ivanov, M., Shcherbakov, I., Okulov, A., Shaburova, N., Liu, K., Khasanova, E., & Samoilovskikh, P. (2025). Effect of activated flux GTAW with AlCoCrFeNi2.1 eutectic high entropy alloy interlayer on microstructure and mechanical properties of dissimilar P91/304?L steel joints. Journal of Materials Processing Technology, 340, 118873. https://doi.org/https://doi.org/10.1016/j.jmatprotec.2025.118873
Tao, Z., Liu, Y., Yu, S., Gao, C., Yao, C., Wu, H., Gao, X., & Du, L. (2025). Effect of heat input on microstructural evolution and impact toughness in dissimilar weld metals between medium Mn and V-microalloyed steel. Alexandria Engineering Journal, 114, 95–111. https://doi.org/https://doi.org/10.1016/j.aej.2024.11.082
Thongsong, P., Raksat, C., Wattanajitsiri, V., & Kimapong, K. (2025). Interpass temperature control for enhancing tribological and microstructural properties of multi-pass GTAW aluminum-clad SCM440 steel. Results in Engineering, 27, 107043. https://doi.org/https://doi.org/10.1016/j.rineng.2025.107043
Tiwari, S., Kesharwani, R., Jha, K. K., Mishra, R., & Gope, P. C. (2024). Microstructural, texture, and crystallographic analysis of SiC particle incorporation in double-sided friction stir welding of dissimilar aluminium alloys. Materials Today Communications, 40, 109543. https://doi.org/https://doi.org/10.1016/j.mtcomm.2024.109543
Wang, Z., Xue, H., Hui, Y., Wang, R., Wu, J., & Zhang, Y. (2025). Investigation of crack propagation and mechanical field evolution at the tip of a growing crack under variable loading in dissimilar metal welded joints. International Journal of Pressure Vessels and Piping, 216, 105496. https://doi.org/https://doi.org/10.1016/j.ijpvp.2025.105496
Wu, C., Chen, L., Li, J., Meng, X., Guo, L., & Feng, X. (2025). Laser shock peening of 6061-T6 aluminum alloy friction stir welding joints: Microstructure evolution, fracture morphology and strengthening mechanism. Journal of Materials Research and Technology, 39, 3981–3998. https://doi.org/https://doi.org/10.1016/j.jmrt.2025.10.103
Yadav, J., Gangil, N., Siddiquee, A. N., Ali Mohsin, M. E., Alnamasi, K., Moinuddin, S. Q., Khan, M. F., & Maheshwari, S. (2025). Effect of tool pin profiles on defects formation during friction stir welding of AA 6082-T6 straight-pipes-butt-weld joints. Journal of Materials Research and Technology, 36, 1645–1657. https://doi.org/https://doi.org/10.1016/j.jmrt.2025.03.185
Yang, J., Dong, H., Wu, G., & Xiong, F. (2025). Experimental and numerical simulation study on microstructure, residual stress and mechanical properties of Fe–Mn–C–Cr cryogenic high-manganese steel arc-welded joint. Journal of Materials Research and Technology, 35, 1335–1347. https://doi.org/https://doi.org/10.1016/j.jmrt.2025.01.114
Yang, Y., Huang, X., Yu, X., Wang, S., & Ji, H. (2024). Comparative analysis of welding quality in Q235/20# dissimilar steel: Intermittent vs. full TIG welding. Journal of Materials Research and Technology, 33, 8768–8779. https://doi.org/https://doi.org/10.1016/j.jmrt.2024.11.191
Yelamasetti, B., Devi, B. T. L., Saxena, K. K., Sonia, P., Vardhan, T. V., Sree, N. S., khubnani, R., Abdo, H. S., & Alnaser, I. (2024). Mechanical characterization and microstructural evolution of Inconel 718 and SS316L TIG weldments at high temperatures. Journal of Materials Research and Technology, 32, 196–207. https://doi.org/https://doi.org/10.1016/j.jmrt.2024.07.157
Yelamasetti, B., Phani Sushma, I. S., Radha, K. K., Zubairuddin, M., Sharma, S., Arunachalam, K. P., Ismail, A. I., & Ramaswamy, K. (2025). Investigation of thermal fields, residual stresses, and tensile strength of dissimilar weldments of AA5052-AA7075 alloys on the stress corrosion cracking: Comparative analysis of coolant effects for enhancing weld integrity. Journal of Materials Research and Technology, 38, 6315–6326. https://doi.org/https://doi.org/10.1016/j.jmrt.2025.09.032
Yu, J., Zhang, H., Wang, B., Du, R., Fan, Y., & He, P. (2023). Interfacial evolution behavior and mechanical properties of Ti/steel joint via ultrasonic seam assisted resistance spot welding with Cu interlayer. Journal of Manufacturing Processes, 95, 535–550. https://doi.org/https://doi.org/10.1016/j.jmapro.2023.03.081
Zhang, B., Ning, Y., Wang, Z., Li, M., Xie, B., & Liu, Q. (2024). Interface microstructural evolution, microhardness variation mechanism and 750 °C tensile behavior of the HIPed/FGed PM superalloy plastic bonded joints. Journal of Materials Research and Technology, 30, 8938–8951. https://doi.org/https://doi.org/10.1016/j.jmrt.2024.05.259
Zhang, Q., Xu, J., Wu, B., Wang, Q., Wang, X., Zhang, Z., & Zhou, H. (2025). Influence of transverse residual stress and welding defect on fracture performance of thick weld based on GTN damage model. International Journal of Naval Architecture and Ocean Engineering, 17, 100654. https://doi.org/https://doi.org/10.1016/j.ijnaoe.2025.100654
Zhang, Y., Fang, C., Wang, W., & Hou, H. (2023). Cyclic plasticity and ULCF behavior of steel butt-joints considering different welding methods. International Journal of Fatigue, 173, 107684. https://doi.org/https://doi.org/10.1016/j.ijfatigue.2023.107684
Zhou, X., Li, R., Liu, F., Wang, B., Wei, L., Tian, L., Yang, M., Song, X., & Tan, C. (2024). Microstructure evolution and corrosion behavior improvement of oscillation laser welded 2205/316L dissimilar joints used in offshore platform. Ocean Engineering, 311, 118833. https://doi.org/https://doi.org/10.1016/j.oceaneng.2024.118833
Zhu, Q. L., Yu, J. M., Xu, C., Li, X., Zhang, Z. H., Hu, Z. R., Wang, X. N., & Nagaumi, H. (2025). Advancing near-infrared and blue hybrid laser welding: Energy efficiency and microstructural refinement in Al-Mg-Si dissimilar joints. Journal of Materials Processing Technology, 340, 118842. https://doi.org/https://doi.org/10.1016/j.jmatprotec.2025.118842
Authors
Copyright (c) 2026 Saripuddin M, Li Wei, Zhang Li
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
